MODEL: KPES100
GAUGES
Replacing the Espresso and Frothing Gauges
of the Pro Line Model KPES100 will require a clean, dry and well lighted
workplace. To protect the finish of the unit, the workplace surface should
be cushioned with a protective cloth or carpet. Your Electrical Service
Workplace should comply with all Local, Regional and National Electrical
Codes.
ALWAYS CHECK THE FOLLOWING:
1. Remove any soil or grime from the Espresso
maker Chassis and clean the offended surfaces with a mild soap solution.
This page is UNDER CONSTRUCTION.
Last Updated: September 29, 2004